contact us

Use the form on the right to contact us.

You can edit the text in this area, and change where the contact form on the right submits to, by entering edit mode using the modes on the bottom right.

200 Shames Drive
Westbury, NY 11590
USA

(516)-442-3923

Thank you for visiting www.valplast.com

Valplast is one of the most cosmetic, comfortable and affordable methods of tooth replacement available today. Since 1953, millions of people have discovered the exceptional benefits that Valplast can bring to their appearance and confidence.

Blog

Next week, we will be at the Greater New York Dental Meeting. We have so much planned and you won't want to miss out. Our table demonstrations will showcase our new finishing and polishing kits as well as our official Valplast chairside adjustment kit. .

 

VALPLAST TAKES ON CALIFORNIA, ATTENDING LAB DAY WEST 2015

Peter Nagy

Round 2 of LMT LAB Day Tradeshows Continues in Anaheim California

 Westbury, NY- Valplast International Corporation will be in Anaheim California attending LMT LAB Day West. Among the days many festivities, Valplast will be hosting an all day hospitality suite at the convention center showcasing specific techniques and methods for working with Valplast material.

CEO of Valplast International Corp, Peter S Nagy comments, “Valplast® partials are the first flexible partials in the industry, and our techniques are continuously being updated to reflect contemporary standards of productivity and consistency. Many of the latest instruments and procedures will be presented in our course series.”

Each course caters to a specific part of the Valplast process. The first session, New Techniques for Valplast® Flexible Partials: CAD/CAM Technology Overview, Design Essentials and Easy Finishing and Polishing, will be the first course of the day starting at 8:00am. Immediately following will be a 2 hour hands on workshop specializing in CAD for Valplast® and Finishing and Polishing Valplast® Flexible Partials. Kicking off the afternoon will be a seminar on Incorporating Digital Impressions into the Partial Denture Lab beginning at 1:30pm.

“Incorporating CAD/CAM technology in Valplast® Partial fabrication provides major improvements in precision, productivity, and results.  Valplast has fully embraced improvements to traditional fabrication techniques as well as future technological advances to maintain the viability of Valplast® Flexible Partials long into the future.  The research team working with Justin S. Marks, C.D.T., Valplast’s Vice President for Dental Technology, is also actively developing open source technology to work with metal-frame partials and conventional full dentures in the CAD/CAM environment,” explains Mr. Nagy.

Registration for these courses is recommended. Please visit Valplast.eventbrite.com to sign up. All attendees are eligible to receive scientific credits for attending these courses. 

                                                                        ###

About Valplast International Corporation

Valplast International Corporation® was founded in 1953 by Arpad F. Nagy and Tibor F. Nagy and became a pioneer in removable flexible partials. With the creation and development of the Valplast® resin which is still used today, the Nagy’s were able to offer the dental industry an effective method for constructing partial dentures.